10 Ways to Fix SD Card & Pen Drive Not Showing In Computer

Fix SD Card And Pen Drive Not Showing

There are many ways to fix SD Card And Pen Drive Not Showing in Computer but only some are worthy and effective. So, below are the top 10 probable methods through which you can use to solve the issue regarding the external devices.

Possible reasons to solve SD Card Not Detected 

There are some issues which you need to check and go through before you move on to further methods:

• Check whether the driver is complete and functional or not.
• Look for the USB port in the system, whether it is completely functional or not.
• Check the external device whether it is functional or not.

Once you have gone through all the basics in the system and if, still you are facing issues then read the below-mentioned methods.

1. Run Troubleshoot

Steps:

1. Click on the windows search bar
2. Search for “Troubleshooting” or open directly from the control panel
3. Open Troubleshooter
4. Click on “Hardware and Sound”
5. Look for “devices”
6. Click on “Hardware and devices”
7. Then troubleshooting windows will run

Then once you have run the troubleshooter you can see the issues that are resolved or any issues which can be fixed by the user itself.

2. Update Drivers 

Steps:

1. Click on the windows search bar
2. Search for “Device manager” or open directly from the control panel
3. Open Device manager
4. Look for USBC (Universal Serial Bus Controller)
5. Expand by clicking on it
6. Look for the inserted external device
7. Right-click on it
8. Click on “Update driver software”
9. Click on “Search automatically for updated driver software”
10. Now restart the system

Or You Can Follow These Steps:

1. Click on the windows search bar
2. Search for “Device manager” or open directly from the control panel
3. Open Device manager
4. Look for USBC (Universal Serial Bus Controller)
5. Expand by clicking on it
6. Look for the inserted external device
7. Right-click on it
8. Click on “Uninstall”
9. After it is uninstalled
10. Look for “Action” at the top side
11. Then click on “Scan for hardware changes”
12. Then click on “Disk Drivers”
13. Select the inserted external device
14. Then right-click on it 
15. Select properties and Populate the storage device
16. And done

3. Change Driver Letter 

Steps:

1. Click on the windows search bar
2. Search for “Disk management” or open directly from the control panel
3. Open “Hard disk partition”
4. Look for the external disk 
5. Right-click on it
6. Click on “Drive letter and paths”
7. Now change the drive letter if visible 
8. Or add a new drive letter if any drive letter is not shown
9. And done

4. CHKDSK Command

Steps:

1. Click on the windows search bar
2. Search for “Command Prompt or CMD”
3. Right-click on it and Run it as administrator
4. Type “CHKDSK (allocated–drive-letter):/f” and enter
5. Then it will start repairing the device
6. And done

5. File System Issue

For this method, you will have to download a tool i.e. MiniTool Partition Wizard.

Steps:

1. Open the tool
2. Look for the disk
3. Right-click on the particular disk
4. Click on “select file system”
5. Now click on “check and fix detected errors”
6. Then click on the start button
7. And you are done

6. Creating Partition 

Steps:

1. Click on the windows search bar
2. Search for “Command Prompt or CMD”
3. Right-click on it and Run it as administrator
4. Type “diskpart” and enter
5. After entering DISKPART type “list disk” and enter
6. Then type “select disk (disk number) ” and enter
7. Now type “create partition primary” and  enter
8. And done

7. Windows Services 

Steps:

1. Click on the windows search bar
2. Search for “Run” or use the shortcut “Windows + R”
3. Type “services.msc” in the Run bar and enter
4. Look for “Human interface device service”
5. Double click and change it to “automatic” startup type
6. Do the same for “Plug and play”, “Shell hardware detection”, “Storage devices” and “UPnP device host”
7. After you have changed all these startup types to automatic mode then just close the window
8. And you are done

8. Attrib Command

Steps:

1. Click on the windows search bar
2. Search for “Command Prompt or CMD”
3. Right-click on it and Run it as administrator
4. Type “attribute –h –r –s /s /d (drive letter):\*.*” and enter
5. Now it will take a few minutes and automatically repair the drives

Make sure to hide your files again because this command also shows hidden files after execution.

9. Format Using Malvastyle

Again, for this method, you will have to download a third-party tool i.e. Malva Style.

Download: Malvastyle

Steps:

1. Open the tool
2. Click on “USB only” box
3. Click on the dropdown menu and select the device
4. Once you have selected the device
5. Click on “disk part” then click “ok”
6. Now the formatting process will begin
7. And you are done

10. Managing and Altering Partition

 Steps:

1. Click on the windows search bar
2. Search for “Command Prompt or CMD”
3. Right-click on it and Run it as administrator
4. Type “diskpart” and enter
5. After entering DISKPART type “list disk” and enter
6. Then type “select disk (disk number) ” and enter
7. Type “list partition” and enter
8. Type “select partition (partition number)” and enter
9. Type “delete partition” and enter
10. Type “create partition primary” and enter
11. Type “clean” and enter
12. Type “active” and enter
13. Open Disk management
14. Select the device and double click on it
15. Now select new simple volume
16. Click next, select letter
17. Then name the device
18. And Finished

FAQs

Conclusion

You may face issues of SD Card And Pen Drive Not Showing In Computer so, if any of you face issues regarding the external device errors be it an SD card or a Pen drive then above are top 10 methods to do so. Make sure you can also lose the data from the device so carefully read all the steps and execute accordingly.

Hence, if you liked this post then do share it with your friends and family.